Home Cinema Installations and Great Transmission Through Doors

The reference level of ones soundtrack is 105db and 115db for the LFE channel. Most people would find these levels quite high, but not tough listen to, in a correctly designed home cinema room.

A problem occurs though, when we face the challenge of keeping the noise inside the cinema room. In home installation, quite often we find bedrooms and other living areas to be right next towards the Home Theater Installation St Albans cinema residence. Special room construction techniques allow us create a sufficient noise barrier, in order to reduce any sound transmission on the adjacent rooms.

However, doors continually been the weakest point, in this attempt. The mass, damping and stiffness of the home cinema door determines its resistance towards the passage of any sound waves. A door’s ability to lessen noise is written by its Sound transmission Class. This means, the higher in the Class the better the efficiency.

One more problem arises though; Sound waves can travel through any opening with very little harm. And to top it off, a tiny hole in a barrier would transmit almost as much sound being a much larger emergency. This acoustic property of sound could be an appreciable problem in a small cinema installation, where high quality construction is required. Which is where acoustical gaskets come into engage. A home cinema door, so that you can be effective, the seals around the head, jamb and sill must be complete and air-tight.

In other words, the quality of the acoustical gasket in a house cinema installation, would determine how close real sound performance of the door, can come to the published requirements. A hi-end home cinema design should take every detail into consideration, to ensure a hi-end acoustical result.